machine machine
I want
a machine
arrow arrow

CROSSCUT SAW

UKS 1000 Automat

The UKS 1000 Automatic crosscut saw is designed for cutting logs, construction timber, or sharply cut boards, which require a large cutting pattern. Another application is cutting boards and slats in pallet production. On average, this saw can process 33-35 m3 of pallet lumber per shift (8 hours), or approximately 25,000 pieces of pallet blocks. When cutting logs with a length of 5 meters and an average volume of 0.25 m3 per log, the capacity is approximately 6 m3 of logs per hour. The saw can be operated by a single worker when using a cross-feed conveyor, along which the material to be cut arrives, for example, from a frame saw. The placement of a second worker is limited by the weight and quantity of the material loaded on the machine without a cross-feed conveyor.

More information about the machine arrow red arrow white
Basic Cutting Modes

1. Manual Mode
You can set each cut length by moving the material using the buttons on the panel or by adjusting the length value on the control panel's dial. Initiate the cut pressing the button on control board. This mode is suitable for individual sequential cuts.

2. Automatic Mode

a) Set a single cut dimension for the entire length of the input material. Upon initiating the cut with the pedal, the entire material will be automatically cut to this set value. After completing the cut, the feeder will return to the preset length value of the input material. This mode is suitable for the production of pallet blocks, allowing for a quick transition between different values during frequent changes in input material. 

b) Set a desired combination of cut dimensions for the entire length of the input material. Initiating the cut with the pedal will result in the automatic cutting of the entire material into these combinations of lengths. After completing the cut, the feeder will return to the preset length value of the input material. The machine's memory can store up to 10 programs with 10 lengths each, allowing for the easy rewriting, editing, inserting, and deleting of programs. This mode is ideal for achieving high material yield and is particularly useful in the production of cross-sections for a wide range of packaging products. In automatic mode, you can set automatic front and rear trims.

Sturdy and solid construction with a robust cover

in the cutting area ensures high work safety.

Material Flow

In the basic configuration, the saw has a LEFT orientation, meaning the material flow is from right to left.

The quality of individual components, materials, and processing

ensures trouble-free operation and long life in demanding working conditions.

Safety features in the basic equipment

include an electronic packet guard preventing material collision with the upper pressure and an end flap with a safety switch against unintended material ejection beyond the operator's reach. Priority is given to elements that prevent operator injury or machine damage.

Automatic Loading System

The automatic loading system is part of the basic saw configuration. It is a pushing device that moves along a precise linear rail with bearings. This design ensures the long life of the linear guidance and very precise positioning of the workpiece for cutting.

Integrated Side and Top Pressure

Ensures the secure fixation of the material during the cut, both to the work table and the rear support. This ensures precise, perpendicular cuts without unintended material movement.

Clear LCD Touch Display

Enables easy and comfortable machine control. The individual control elements are well-visible, reduce operator eye strain, and provide a perfect overview. Maximum ergonomics and the designed software ensure complete control over the machine.

Work Table at the Input Before Cutting

This is without a tilt and with rollers. It allows the operator to conveniently sort and prepare material, which is then fed into the loading area. This eliminates downtime during saw operation and strenuous material handling. The table is equipped with a safety flap at its end to prevent unintended material ejection beyond the operator's reach.

Basic Fixed Table at the Output After Cutting

This is standardly two meters long and partially covered in the cutting area. The operator can safely remove the cut material without being endangered by possible cut-offs, chips, or risking injury from the cutting disc. The table tilt is 8°. If the saw is equipped with a cross-loading conveyor at the input, the table tilt is 0°.

For additional machine options, refer to the "Optional Equipment" tab.

 
P A R A M E T E R S T A N D A R D O P T I O N*
Material Input
Length of the entry table
3,2 - 7,2 m 
-
Tilting the input table -
Saw Orientation left Right
Cross table extension - yes
Material Output
Fixed table 2 m Optional extension
Mechanization at the output - Optional
Control
LCD touch screen 8" -
Start of the cutting cycle pedal -
Cutting data*
Material feeding accuracy +/- 0.5 mm -
Feed rate Continuous regulation -
Saw blade
Disc diameter 700 mm 600 mm
Inner diameter of the clamping hole 80 mm -
Loader
Propulsion AC servo -
Loader speed  max. 1 m/s -
Saw engine
Performance  11 kW 15 kW, 22 kW
Connection
Dust extraction 2x Ø 120 mm - 30 m/s -
Compressed air pressure min. 0.6 Mpa -
Capacitive air consumption 350 l/min. -
Voltage ~3x400 V/50Hz -

Störi Mantel automatic crosscut saws can be complemented or configured with a wide range of optional equipment. Here, we present the basic options, but if you have a different requirement or inquiry, we would be happy to discuss it with you.

Saw

Right-hand configuration - material flow is from left to right.

More powerful motor - the saw can be equipped with an 15 kW or 22 kW motor.

Saw blade of a different diameter - optionally, the saw can be fitted with a 600 mm diameter blade.

Lifting feeder - pneumatic or mechanical lifting of the feeding arm above the placed material when the feeder returns to the restart position.

Special Model - simplifies the shortening of low-quality material. The operator checks and visually evaluates each piece at the input, choosing lengths using special added buttons in the cutting scheme. The modified feeder with automatic length measurement then measures the material, and the saw cuts it according to the input.

Cutting Conditions

Finger pressure guide - increases the accuracy and perpendicularity of the cut. Presses the material against the support during cutting, preventing unintended movement during the cut.

Side pressure guide at the output - useful where long pieces are shortened. The pressure guide increases the accuracy and perpendicularity of the cut.

Mechanization at the Input

Cross-chain feed conveyor - can be 1 or 2 meters long. The number of conveyor arms is determined by the length of the saw's input table and can be customized according to customer preferences.

Mechanization at the Output

Extension of the basic fixed output table (smooth)

Output fixed table with rollers - facilitates the easy handling of long and heavy material.

Driven roller conveyor - can be up to 4 meters long and 700 mm wide.

Automatic ejector with inclined collecting table (gravity chutes) - simplifies the sorting of shortened material. Automatic saws can have up to two ejectors.

Rake conveyor for cutoffs or blocks.

Special Equipment

Heating of the electrical distribution panel and control panel - necessary if the machine is located in unheated spaces.

Do you need more information?

Enter your e-mail, and our sales representative will get in touch with you regarding the machine.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
parameters UKS 1000 A KP 500 A KP 900 A UKS 850 A
Saw blade basic (optional) 700 mm (600 mm) 550 mm (500 mm) 600 mm (550 mm) 600 mm (550 mm)
Motor power basic (optional) 11 kW (15 kW; 22 kW) 5,5 kW (7,5 kW) 7,5 kW (11 kW; 15 kW) 11 kW (15 kW; 22 kW)
Upper pressure (max. height) 250 mm 160 mm 180 mm 200 mm
Cutting width 760 mm 300 mm 390 mm 720 mm
Make production<br>more efficient

Make production
more efficient

Speed, accuracy, and high-quality cutting ensure more efficient material yield.

Reduce the<br>workforce needed

Reduce the
workforce needed

Simple solutions facilitating machine operation and handling of heavy materials enable a reduction in the number of workers.

Save costs

Save costs

Minimizing waste and unnecessary cutting of expensive materials, flexibility in your orders, and easy machine maintenance lead to a quick economic return on investment and reduced operating costs.

Operational reliability and precise cutting accuracy

Thanks to advanced technology and quality construction, the automatic crosscut saw always ensures a perfect and precise cut. This enables you to achieve a high level of quality in the final product.

The ability to cut boards or blocks individually or in batches

Work flexibly with wooden materials, whether you need to cut boards or beams individually or in batches. This allows you to easily adapt to the requirements of subsequent processing and production.

I am interested in this machine arrow arrow

Do you need more information?

Enter your e-mail, and our sales representatives will get in touch with you regarding the machine.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
loading
scroll top scroll top

Before you continue

We constantly try to improve our website and we need data to do so. We collect them through cookies, that help us analyze traffic and personalize advertisement. If you do not agree with collection click here.

Cookies - settings

close

We constantly try to improve our website and we need data to do so. We collect them through cookies, that help us analyze traffic and personalize advertisement. If you do not agree with collection click here.

Manage consent preferences

Strictly necessary cookies

These cookies are necessary for the website to function.

always active

Targeting cookies

They collect information that helps tailor ads to your interests.

Functional cookies

With functional targeting we will process information about your behaviour on our website. Thanks to that we are able to offer you exactly what you are interested in.

Analytics cookies

They help us find out who visits our website and how people use it. Thanks to those data we can efficiently improve our content and websites functionality.